Sioux Chief 650 Water Hammer Arrestor, Type B, 3/4 Inch, MIPT, 350 psi, 2900 psi Burst, 150 psi Surge, 2 × 4 Inch Wall Cavity Mount, 250 deg F, Copper Body, EPDM Seals and O-Rings, 8-3/4 Inch L x 1-3/8 Inch W
| Body Material | : | Copper |
| Dimensions | : | 8-3/4 Inch L x 1-3/8 Inch W |
| End Style | : | MIPT |
| Mounting Type | : | 2 × 4 Inch Wall Cavity |
| Nominal Size | : | 3/4 Inch |
| Pressure Rating | : | 350 psi, 2900 psi Burst, 150 psi Surge |
| Series | : | 650 |
| Softgoods Material | : | EPDM Seals and O-Rings |
| Temperature Rating | : | 250 deg F |
| Type | : | Type B |
Sioux chief 650 series piston-type water hammer arresters shall be required in piping systems. Water hammer arresters shall have sufficient volume of air to dissipate the calculated kinetic energy generated in the piping system. Arresters shall be effective when installed at any angle. Arresters shall be approved for installation with no access panel required.
- Lead-free
- Installs at any angle
- Allows for installation in 2 × 4 wall cavity
- Hydra-Rester male sweat fittings are compatible with press-fitting systems
- Lifetime cycle tested at U. S. Testing laboratories to withstand 10,000 shock cycles. Factory tested to withstand 500,000 cycles without failure
- ASSE 1010 certified as a water hammer arrester that is “designed to provide continuous protection, without maintenance” allowing the HydraRester to be installed without access panels
- Brass piston and cap
Standard/Approvals: ANSI/ASSE 1010-2004 Certified
Application: Commercial and Industrial
Brochure
