Bradford White® D-65T-399-3NA
Bradford White® ICON HD™ Hydrojet® Commercial Flue Damper Gas Water Heater, 399999 BtuH Heating, Natural Gas, 65 gal
- Manufacturers: Bradford White
- Brand Name: Bradford White®
- CPEPN: D-65T-399-3NA
- MPN: D-65T-399-3NA
- UPC: 671632257072
- Min. Order Qty: 1
- Qty. Interval: 1
-
Availability:
-
Price:
Bradford White® ICON HD™ Hydrojet® Gas Water Heater, Commercial Flue Damper, 399999 BtuH Heating, Natural Gas, 1 Inch NPT Gas Connection, 65 gal Tank, Electronic Ignition, 8 Inch Draft Hood, 277 gph at 140 deg F Recovery, Magnesium Anode Rod Heating Element, 1-1/2 Inch NPT Water Connection, 1600 deg F, Steel, Vitraglas®, 28-1/4 Inch Dia x 73-1/4 Inch H, Includes Temperature and Pressure Relief Valve
| Dimensions | : | 28-1/4 Inch Dia x 73-1/4 Inch H |
| Draft Hood Size | : | 8 Inch |
| Finish | : | Vitraglas® |
| Gas Connection | : | 1 Inch NPT |
| Gas Type | : | Natural Gas |
| Heating Capacity | : | 399999 BtuH |
| Heating Element | : | Magnesium Anode Rod |
| Ignition Type | : | Electronic |
| Includes | : | Temperature and Pressure Relief Valve |
| Material | : | Steel |
| Recovery Rate | : | 277 gph at 140 deg F |
| Series | : | ICON HD™, Hydrojet® |
| Tank Capacity | : | 65 gal |
| Temperature Rating | : | 1600 deg F |
| Type | : | Commercial, Flue Damper |
| Warranty | : | 3 or 5 Years on Tank, 1 Year on Component Parts |
| Water Connection | : | 1-1/2 Inch NPT |
- ICON HD™ - Intelligent proven design combines temperature control, diagnostic codes, and system ignition functions into a single control board with a digital LCD display. Control panel cover tilts down for ease of wiring and service
- Operation Mode - Two different digitally displayed operation modes have the capability of adjusting the temperature setting up to 180 deg F (82 deg C), and adjusting the degree setting (deg F to deg C, or deg C to deg F)
- Electronic Ignition - High voltage, low current electricity is sent to the pilot electrode initiating a spark to ignite the pilot gas. This results in savings of pilot gas during stand-by periods because the pilot flame only operates when there’s a call for heat
- Automatic Flue Damper - Reduces stand-by loss, saving gas consumption and improving overall efficiency
- Factory Installed Hydrojet® sediment reduction system - cold water inlet sediment reducing device helps prevent sediment build up in the tank
- Vitraglas® Lining - Bradford White tanks are lined with an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water. This formula (Vitraglas®) is fused to the steel surface by firing at a temperature of over 1600deg F (871 deg C)
- Non-CFC foam insulation - covers the sides and top of tank, reducing the amount of heat loss. This results in less energy consumption, improved operation efficiencies and jacket rigidity
- Water Connections - Factory installed true dielectric waterway fittings extend water heater life and eases installation. Multiple water connection locations allow for greater installation flexibility
- Hand hole cleanout - allows inspection of tank interior and facilitates the removal of sediment deposits
- E.C.O. - An automatic re-set Energy Cut Off (E.C.O) shuts off all gas in event of an overheat condition. This automatically re-sets when operation conditions are back to normal
- Magnesium Anode Rods - Provide added protection against corrosion for long trouble-free service
- ASME construction
Standard/Approvals: AHRI Certified, ANSI Z-21.10.3, CSA Certified
Application: Apartments, Cafeterias and Restaurants
Operation Manual