Bradford White® D-80T-425-3NA

Bradford White® ICON HD™ Hydrojet® Gas Water Heater, Commercial Flue Damper, 425000 BtuH Heating, Natural Gas, 1 Inch NPT Gas Connection, 80 gal Tank, Electronic Ignition, 10 Inch Draft Hood, 294 gph at 140 deg F Recovery, Magnesium Anode Rod Heating Element, 1-1/2 Inch NPT Water Connection, 1600 deg F, Steel, Vitraglas®, 28-1/4 Inch Dia x 75-1/2 Inch H, Includes Temperature and Pressure Relief Valve

• ICON HD™ - Intelligent proven design combines temperature control, diagnostic codes, and system ignition functions into a single control board with a digital LCD display. Control panel cover tilts down for ease of wiring and service
• Operation Mode - Two different digitally displayed operation modes have the capability of adjusting the temperature setting up to 180 deg F (82 deg C), and adjusting the degree setting (deg F to deg C, or deg C to deg F)
• Service Mode - Eight different digitally displayed service modes can be easily cycled through by pressing the select button. There is the capability of adjusting the temperature setting up to 180 deg F (82 deg C), adjusting the degree setting ( deg F to deg C, or deg C to deg F), locking the maximum temperature setting that can be adjusted in operation mode, displaying the average water temperature (if water heater has two sensors), displaying the upper temperature sensor, displaying the lower temperature sensor, displaying the flame current of the pilot flame, and displaying diagnostic codes
• Electronic Ignition - High voltage, low current electricity is sent to the pilot electrode initiating a spark to ignite the pilot gas. This results in savings of pilot gas during stand-by periods because the pilot flame only operates when there’s a call for heat
• Automatic Flue Damper - Reduces stand-by loss, saving gas consumption and improving overall efficiency
• Factory Installed Hydrojet® sediment reduction system - cold water inlet sediment reducing device helps prevent sediment build up in the tank
• Vitraglas® Lining - Bradford White tanks are lined with an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water. This formula (Vitraglas®) is fused to the steel surface by firing at a temperature of over 1600 deg F (871 deg C)
• Non-CFC foam insulation - covers the sides and top of tank, reducing the amount of heat loss. This results in less energy consumption, improved operation efficiencies and jacket rigidity
• Water Connections - Factory installed true dielectric waterway fittings extend water heater life and eases installation. Multiple water connection locations allow for greater installation flexibility
• Hand hole cleanout - allows inspection of tank interior and facilitates the removal of sediment deposits
• E.C.O. - An automatic re-set Energy Cut Off (E.C.O) shuts off all gas in event of an overheat condition. This automatically re-sets when operation conditions are back to normal
• Magnesium Anode Rods - Provide added protection against corrosion for long trouble-free service
• ASME construction

Standard/Approvals: AHRI Certified, ANSI Z-21.10.3, CSA Certified

Application: Apartments, Cafeterias and Restaurants

• Operation Manual https://4500cpe.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/Bradford_White_D_80T_425_3NA_Operation_Manual.pdf
• Parts List https://4500cpe.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/Bradford_White_D_80T_425_3NA_Parts_List.pdf
• Service Manual https://4500cpe.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/Bradford_White_D_80T_425_3NA_Service_Manual.pdf
• Specification Sheet https://4500cpe.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/Bradford_White_D_80T_425_3NA_Specification_Sheet.pdf
• Warranty Sheet https://4500cpe.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/Bradford_White_D_80T_425_3NA_Warranty_Sheet.pdf