Bradford White® Defender Safety System® ICON System® Gas Water Heater, Commercial Direct Vent Light Duty, 50000 BtuH Heating, Natural Gas, 1/2 Inch NPT Gas Connection, 48 gal Tank, 4 x 6 Inch Draft Hood, 47 gph at 100 deg F Recovery, 60 % Energy Efficient, Magnesium Anode Rod Heating Element, 3/4 Inch NPT Water Connection, 1600 deg F, Steel Surface, Vitraglas®, 22 Inch Dia x 72-5/16 Inch H, Includes Temperature and Pressure Relief Valve
Dimensions |
: |
22 Inch Dia x 72-5/16 Inch H |
Draft Hood Size |
: |
4 x 6 Inch |
Energy Efficiency |
: |
60 % |
Finish |
: |
Vitraglas® |
Gas Connection |
: |
1/2 Inch NPT |
Gas Type |
: |
Natural Gas |
Heating Capacity |
: |
50000 BtuH |
Heating Element |
: |
Magnesium Anode Rod |
Includes |
: |
Temperature and Pressure Relief Valve |
Material |
: |
Steel Surface |
Recovery Rate |
: |
47 gph at 100 deg F |
Series |
: |
Defender Safety System®, ICON System® |
Tank Capacity |
: |
48 gal |
Temperature Rating |
: |
1600 deg F |
Type |
: |
Commercial, Direct Vent, Light Duty |
Warranty |
: |
3 or 5 Years on Tank, 1 Year on Component Parts |
Water Connection |
: |
3/4 Inch NPT |
- Bradford White ICON System™ - Intelligent gas control with proven millivolt powered technology and built-in piezo igniter. A standard, off-the-shelf thermopile converts heat energy from the pilot flame into electrical energy to operate the gas valve and microprocessor. No need for external electricity
- Enhanced Performance - Proprietary algorithms provide enhanced First Hour Delivery ratings and tighter temperature differentials
- Advanced Temperature Control System - Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels (up to 180 deg F)
- Intelligent Diagnostics - An exclusive green LED light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting
- Pilot On Indication - Flashing green LED provides positive indication that pilot is on
- Separate Immersed Thermowell - High-strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water. No need to drain the tank when removing gas valve
- Closed Combustion - All air for combustion is taken directly from the outside. The co-axial vent pipe (pipe inside a pipe) draws combustion air in through the outer pipe and exhausts the products of combustion through the inner pipe. The co-axial vent pipe at the top of the unit can be rotated for venting flexibility
- Reinforced Seals - Seals surround the closed combustion chamber and the FVIR inner door, preventing the ignition of Flammable Vapors outside of the water heater
- Maintenance-Free - The vent piping and the closed combustion chamber with reinforced seals does not require regular cleaning under normal operating conditions
- Factory-Installed Hydrojet® total performance system - cold water inlet sediment reducing device helps prevent sediment build-up in tank. Increases first hour delivery of hot water while minimizing temperature build-up in tank
- Vitraglas® Lining - Bradford White tanks are lined with an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water. This formula (Vitraglas®) is fused to the steel surface by firing at a temperature of over 1600 deg F (871 deg C)
- Cast aluminum air intake boot - A cast molded air intake boot design provides exceptional durability during installation and operation
- Telescoping Solid Vent Kits - Multiple kits (see reverse side) allow up to 8ft. vertical and 8ft. horizontal vent lengths (horizontal termination only)
- Flexible vent kit - The maximum vent length (horizontal and vertical) can be flexed to 100 inch (horizontal termination only)
- Side Connections - 3/4 Inch (19 mm) NPT tappings that allow easy connections for space heating applications (potable water only)
- 2 Inch Non-CFC foam insulation - surrounds the tank surface, saving energy by retarding loss of heat
- Water Connections - 3/4 Inch NPT factory installed true dielectric fittings extend water heater life and make installation easier
- Low restriction brass drain valve - durable tamper-proof design
Standard/Approvals: AHRI Certified, ANSI Z-21.10.3, CSA Certified
Application: Apartments, Cafeterias and Restaurants
-
Operation Manual
https://4500cpe.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/Bradford_White_LG2DV50H503N_SLD_Operation_Manual.pdf
-
Parts List
https://4500cpe.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/Bradford_White_LG2DV50H503N_SLD_Parts_List.pdf
-
Service Manual
https://4500cpe.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/Bradford_White_LG2DV50H503N_SLD_Service_Manual.pdf
-
Specification Sheet
https://4500cpe.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/Bradford_White_LG2DV50H503N_SLD_Specification_Sheet.pdf
-
Warranty Sheet
https://4500cpe.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/Bradford_White_LG2DV50H503N_SLD_Warranty_Sheet.pdf