Send Print
  1. pin-int

Bradford White® LG2PDV75H803N

Bradford White® LG2PDV75H803N Defender Safety System® ICON System™ Hydrojet® Commercial Light Duty Gas Water Heater

  • Manufacturers: Bradford White
  • Brand Name: Bradford White®
  • CPEPN: LG2PDV75H803N
  • MPN: LG2PDV75H803N
  • UPC: 671632809561 
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Availability: loading
  • Check Branch and Showroom availability
  • ups

    This product ships for free standard ground only.
    Other options will be charged.

Bradford White® Defender Safety System® ICON System™ Hydrojet® Gas Water Heater, Commercial Light Duty Direct Power Vent, 80000 BtuH Heating, Natural Gas, 1/2 Inch NPT Gas Connection, 75 gal Tank, Spark to Pilot Ignition, 3 or 4 Inch Draft Hood, 77 gph at 100 deg F Recovery, Magnesium Anode Rod Heating Element, Wall Mount, 3/4 Inch NPT Water Connection, 1600 deg F, Steel Surface, Vitraglas®, 26 Inch Dia x 72 Inch H, Includes Temperature and Pressure Relief Valve

Dimensions      :      26 Inch Dia x 72 Inch H
Draft Hood Size      :      3 or 4 Inch
Finish      :      Vitraglas®
Gas Connection      :      1/2 Inch NPT
Gas Type      :      Natural Gas
Heating Capacity      :      80000 BtuH
Heating Element      :      Magnesium Anode Rod
Ignition Type      :      Spark to Pilot
Includes      :      Temperature and Pressure Relief Valve
Material      :      Steel Surface
Mounting Type      :      Wall
Recovery Rate      :      77 gph at 100 deg F
Series      :      Defender Safety System®, ICON System™, Hydrojet®
Tank Capacity      :      75 gal
Temperature Rating      :      1600 deg F
Type      :      Commercial, Light Duty, Direct Power Vent
Warranty      :      3 or 5 Years on Tank, 1 Year on Component Parts
Water Connection      :      3/4 Inch NPT
  • Bradford White ICON System™ - Intelligent gas control with spark to pilot ignition system eliminates the constant burning pilot. This results in savings of pilot gas during standby periods (120 VAC)
  • Enhanced Performance - Proprietary algorithms provide enhanced First Hour Delivery ratings and tighter temperature differentials
  • Advanced Temperature Control System - Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels (up to 180 deg F)
  • Intelligent Diagnostics - An exclusive green LED light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting
  • Separate Immersed Thermowell - High-strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water. No need to drain the tank when removing gas valve
  • Closed Combustion Venting System - Power Direct Vent models are ideal for installations which lack sufficient area for combustion, such as new construction homes or additions which are tightly insulated. These models use a twin pipe system where combustion air is drawn from outside the building in one pipe and combustion products are expelled to the outside in another pipe
  • Cast aluminum air intake boot - A cast molded air intake boot design provides exceptional durability during installation and operation
  • Horizontal and Vertical Venting - PVC, ABS, or CPVC. The equivalent feet of intake venting cannot be greater than the equivalent feet of exhaust venting
  • Optional Concentric Vent Kit Termination - Termination fitting provides for only one exit opening through a wall or roof. (Subtract 10ft. for intake pipe and 10ft. for exhaust pipe when calculating total vent length)
  • Flammable Vapor Sensor - Electronic sensor prevents burner operation if flammable vapors are detected. The sensor will also prevent burner operation if there is an ongoing flammable vapor burn inside the combustion chamber (excluding LG2PDV75H803N)
  • Factory-Installed Hydrojet® total performance system - cold water inlet sediment reducing device helps prevent sediment build-up in tank. Increases first hour delivery of hot water while minimizing temperature build-up in tank
  • Vitraglas® Lining - Bradford White tanks are lined with an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water. This formula (Vitraglas®) is fused to the steel surface by firing at a temperature of over 1600 deg F (871 deg C)
  • 2 Inch Non-CFC foam insulation - surrounds the tank surface, saving energy by retarding loss of heat
  • Water Connections - 3/4 Inch NPT factory installed true dielectric fittings extend water heater life and make installation easier
  • Side Connections - 3/4 Inch (19 mm) NPT tappings that allow easy connections for space heating applications (potable water only)
  • Factory-Installed Heat Traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation
  • Protective magnesium anode rod - Provides added protection against corrosion for long trouble-free service
  • Low restriction brass drain valve - durable tamper-proof design

Standard/Approvals: AHRI Certified, ANSI Z-21.10.3, CSA Certified

Application: Apartments, Cafeterias and Restaurants

  • pdfInstruction Sheet https://4500cpe.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/Bradford_White_LG2PDV75H803N_Instruction_Sheet.pdf
  • pdfParts List https://4500cpe.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/Bradford_White_LG2PDV75H803N_Parts_List.pdf
  • pdfService Manual https://4500cpe.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/Bradford_White_LG2PDV75H803N_Service_Manual.pdf
  • pdfSpecification Sheet https://4500cpe.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/Bradford_White_LG2PDV75H803N_Specification_Sheet.pdf
  • pdfWarranty Sheet https://4500cpe.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/Bradford_White_LG2PDV75H803N_Warranty_Sheet.pdf