Bradford White® RE230LN6-1NCWW
Bradford White® Hydrojet® Lowboy Residential Electric Water Heater, 240 V, 1 Phase, 4.5 kW, 28 gal Tank, 1600 deg F
- Manufacturers: Bradford White
- Brand Name: Bradford White®
- CPEPN: RE230LN6-1NCWW
- MPN: RE230LN6-1NCWW
- Min. Order Qty: 1
- Qty. Interval: 1
-
Availability:
-
Price:
- Not Available Online
Bradford White® Electric Water Heater, Lowboy, Residential, Hydrojet®, 240 V, 1 Phase, 4.5 kW, 3/4 Inch NPT, 28 gal Tank, 21 gph at 90 deg F Recovery, 0.95% Energy Efficient, Magnesium Anode Rod Heating Element, Surface Mount, 3/4 Inch NPT Water Connection, 1600 deg F, Steel, 23 Inch Dia x 30-7/8 Inch H
| Dimensions | : | 23 Inch Dia x 30-7/8 Inch H |
| Electrical Connection | : | 3/4 Inch NPT |
| Electrical Ratings | : | 240 V, 1 Phase, 4.5 kW |
| Energy Efficiency | : | 0.95% |
| Heating Element | : | Magnesium Anode Rod |
| Material | : | Steel |
| Mounting Type | : | Surface |
| Recovery Rate | : | 21 gph at 90 deg F |
| Series | : | Hydrojet® |
| Tank Capacity | : | 28 gal |
| Temperature Rating | : | 1600 deg F |
| Type | : | Lowboy, Residential |
| Warranty | : | Limited |
| Water Connection | : | 3/4 Inch NPT |
- Low restriction brass drain valve - durable tamper-proof design
- Fully automatic thermostat controls - fast acting surface-mount thermostat with high limit energy cut-off (manual reset) for safety
- Direct heat transfer with a single immersed element - transfers heat directly and efficiently to the water, screw-in style
- Factory-installed Hydrojet® total performance system - sediment reducing device that also increases first hour delivery of hot water while minimizing temperature build-up in tank
- Vitraglas® lining an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water
- Insulation system - non-CFC foam covers the sides and top of the tank, reducing heat loss
- 3⁄4 Inch NPT factory-installed true dielectric fittings extend water heater life and simplify water line connections
- Factory-installed heat traps design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation
- Protective magnesium anode rod provides added protection against corrosion for long-term, trouble-free service
- Non-simultaneous operation available indicates only one heating element will operate at a time and is standard construction from the factory
- 300 psi test pressure, 150 psi work pressure
Standard/Approvals: CSA Certified, ETL Listed, C.E.C. Listed
Instruction Sheet