Bradford White® ElectriFLEX HD™ CEHD Electric Water Heater, Commercial Heavy Duty, 208/240/277/380/415/480/600 V, 1/3 Phase, 54 kW, 119 gal Tank, 248 gph at 90 deg F Recovery, Magnesium Anode Rod Heating Element, 1-1/2 Inch NPT Water Connection, 1600 deg F, Steel, Vitraglas®, 30-1/4 Inch Dia x 66-3/4 Inch H, Includes Temperature and Pressure Relief Valve
Dimensions |
: |
30-1/4 Inch Dia x 66-3/4 Inch H |
Electrical Ratings |
: |
208/240/277/380/415/480/600 V, 1/3 Phase, 54 kW |
Finish |
: |
Vitraglas® |
Heating Element |
: |
Magnesium Anode Rod |
Includes |
: |
Temperature and Pressure Relief Valve |
Material |
: |
Steel |
Recovery Rate |
: |
248 gph at 90 deg F |
Series |
: |
ElectriFLEX HD™, CEHD |
Tank Capacity |
: |
119 gal |
Temperature Rating |
: |
1600 deg F |
Type |
: |
Commercial, Heavy Duty |
Warranty |
: |
3 or 5 Year Limited Tank and 1 Year Limited on Component Parts |
Water Connection |
: |
1-1/2 Inch NPT |
ElectriFLEX Series™ field convertible commercial electric water heaters provide an incredible level of flexibility. With Light, Medium, and Heavy Duty models, youll find a commercial application solution for almost any situation. Each different class of ElectriFLEX Series™ water heaters offers convertibility of voltage, phase, and kW input. A single model can solve multiple installation requirements. With the appropriate kit, conversions are easily accomplished by a qualified installer at the supply house or in the field.
- ElectriFLEX HD™ models easily convert to your exact requirements
- Reduce needed inventory
- Immersion thermostats - immersion type for accurate temperature control from up to 180 deg F (82 deg C) with manual reset high limit control
- Conversion kits - design certified by ETL for field conversion, conversion kits are available to convert any one model to a variety of voltages, kW inputs and phase
- 3 Inch (76mm) non-CFC foam insulation - covers the sides and top of tank, reducing the amount of heat loss which results in less energy consumption, improved operation efficiencies and jacket rigidity
- Factory installed Hydrojet® sediment reduction system - cold water inlet sediment reducing device helps prevent sediment build up in the tank
- Vitraglas® lining - Bradford White tanks are lined with an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water
- Water connections - factory installed true dielectric fittings extend water heater life and eases installation
- Elements - screw in style low watt density incoloy sheathed elements standard, these elements resist burnout caused by dry fire or lime buildup
- Two magnesium anode rods - provide added protection against corrosion for long trouble free service
- Hand hole cleanout - allows inspection of tank interior and facilitates the removal of sediment deposits
- Low restriction brass drain valve - durable tamper proof design
- Completely pre-wired - with pressure lug terminal block eliminating need for splicing or taping of wires
- Internal fusing - standard on all models
Standard/Approvals: ASHRAE, CEC, cETLus Listed, CSA Certified, NSF Approved
Application: For large restaurants, health clubs, stadiums, schools and just about anywhere large volumes of hot water are required
-
Brochure
https://4500cpe.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/Bradford_White_CEHD_120_12_3CF_Brochure.pdf
-
Parts List
https://4500cpe.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/Bradford_White_CEHD_120_12_3CF_Parts_List.pdf
-
Service Manual
https://4500cpe.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/Bradford_White_CEHD_120_12_3CF_Service_Manual.pdf
-
Specification Sheet
https://4500cpe.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/Bradford_White_CEHD_120_12_3CF_Specification_Sheet.pdf
-
Warranty
https://4500cpe.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/Bradford_White_CEHD_120_12_3CF_Warranty_Sheet.pdf