Bradford White® Electric Water Heater, Residential Large Volume, Series: Hydrojet® RE3, 208/240 V, 1-Phase, 4500 W, 3/4 Inch NPT, 79 gal Tank, 21 gph at 90 deg F Recovery, 0.92 Energy Efficient, Magnesium Anode Rod Heating Element, Surface Mount, 3/4 Inch NPT Water Connection, 1600 deg F, Steel, Vitraglas®, 26 Inch Dia x 61 Inch H
Dimensions |
: |
26 Inch Dia x 61 Inch H |
Electrical Connection |
: |
3/4 Inch NPT |
Electrical Ratings |
: |
208/240 V, 1-Phase, 4500 W |
Energy Efficiency |
: |
0.92 |
Finish |
: |
Vitraglas® |
Heating Element |
: |
Magnesium Anode Rod |
Material |
: |
Steel |
Mounting Type |
: |
Surface |
Recovery Rate |
: |
21 gph at 90 deg F |
Series |
: |
Hydrojet® RE3 |
Tank Capacity |
: |
79 gal |
Temperature Rating |
: |
1600 deg F |
Type |
: |
Large Volume, Residential |
Water Connection |
: |
3/4 Inch NPT |
- Large capacity up to 118 gal - can handle the needs of high demand households with ease
- Built for efficiency, performance and quality
- Factory-installed Hydrojet® total performance system - sediment reducing device that also increases first hour delivery of hot water while minimizing temperature build-up in tank
- Vitraglas® lining - an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, this formula (Vitraglas®) is fused to the steel surface by firing at a temperature of over 1600 deg F (871 deg C)
- Fully automatic controls - fast acting surface mount thermostat with high limit energy cut-off (manual reset) for safety
- Factory-installed heat traps - design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation
- Protective magnesium anode rod - provides added protection against corrosion for long-term, trouble-free service
- Temperature and pressure relief valve - installed
- Low restrictive brass drain valve - durable tamper proof design
- Direct heat transfer with immersed elements - transfers heat directly and efficiently to the water, screw-in style
- Insulation system - non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity
- Water connections - NPT factory-installed true dielectric fittings extend water heater life and simplify water line connections
- Non-simultaneous operation indicates when one element is being heated at a time
- Design evaluated by ETL in accordance with Part 280.707(d) of HUD mobile home construction and safety standards for energy efficiency
-
Installation Sheet
https://4500cpe.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/Bradford_White_RE380T6_1NCWW_Installation_Sheet.pdf
-
Parts List
https://4500cpe.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/Bradford_White_RE380T6_1NCWW_Parts_List.pdf
-
Service Manual
https://4500cpe.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/Bradford_White_RE380T6_1NCWW_Service_Manual.pdf
-
Specification Sheet
https://4500cpe.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/Bradford_White_RE380T6_1NCWW_Specification_Sheet.pdf
-
Warranty Sheet
https://4500cpe.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/Bradford_White_RE380T6_1NCWW_Warranty_Sheet.pdf