Zoeller Flow-Mate™ 190 Effluent Submersible Pump, High Head, Non-Automatic, Sewage, Permanent Split Capacitor, 45 gpm, 1-1/2 Inch NPT Outlet, 137 ft Maximum Head, 2 hp, 230 V, 60 Hz, 1 Phase, 14.5 A, 3450 Rpm, 20 ft, 3-Wire Neoprene Cord and Plug Cord, 130 deg F, Cast Iron, Powder Coated Epoxy, 12-3/4 Inch W x 19-5/16 Inch H
| Amperage Rating | : | 14.5 A |
| Cord Type | : | 20 ft, 3-Wire Neoprene Cord and Plug |
| Dimensions | : | 12-3/4 Inch W x 19-5/16 Inch H |
| Finish | : | Powder Coated Epoxy |
| Flow Rate | : | 45 gpm |
| Material | : | Cast Iron |
| Maximum Head | : | 137 ft |
| Outlet Size | : | 1-1/2 Inch NPT |
| Power Rating | : | 2 hp |
| Series | : | Flow-Mate™, 190 |
| Speed | : | 3450 Rpm |
| Temperature Rating | : | 130 deg F |
| Type | : | High Head, Non-Automatic, Sewage, Permanent Split Capacitor |
| Voltage Rating | : | 230 V, 60 Hz, 1 Phase |
| Warranty | : | Limited |
Zoeller "flow mate" E191 submersible effluent pump is a single seal pump designed for use in residential or light commercial dewatering applications. This durable cast iron pump has a powder coated epoxy finish to prevent corrosion and is designed to provide great heat dissipation from the motor, ensuring a long service life. It is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance.
- Non-Clogging vortex impeller design, bronze class 88-8-0-4 (180 series)
- Enclosed impeller design (model 191, 60 Hz only)
- Float-operated, submersible, 2-pole mechanical switch
- Cast iron switch case, base, motor and pump housing
- No sheet metal parts to rust or corrode
- Stainless steel screws, bolts, float rod, handle, guard, arm and seal assembly
- Oil-filled, hermetically-sealed, automatic reset thermal overload protection (1 Ph only)
- Variable level control systems available
- Neoprene square ring and gasket
- Stainless steel carbon and ceramic rotary shaft seal
- Upper and lower ball bearing running in bath of oil
- Corrosion-resistant
- Automatic units not recommended for use in effluent systems
- Protects motor from seal leaks
- Improved bearing lubrication
- Helps eliminate seal and bearing damage from dry runs
- Class B insulation
- Oil-filled cooling
- Non-Clogging vortex impeller
- 5/8 Inch spherical solid handling
- Unit ships free via UPS
Standard/Approvals: CSA, SSPMA Certified, UL Listed
Application: Light Commercial and Residential
Catalog
