Zoeller Waste-Mate® 290 Sewage Dewatering Pump, High Head, Manual, Permanent Split Capacitor, 118 gpm, 2 Inch NPT Outlet, 50 ft Maximum Head, 1 hp, 230 V, 60 Hz, 1 Phase, 10.2 A, 3450 Rpm, 20 ft, 3-Wire Neoprene Cord and Plug Cord, 130 deg F, Cast Iron, Powder Coated Epoxy, 12-7/8 Inch W x 19-5/16 Inch H
| Amperage Rating | : | 10.2 A |
| Cord Type | : | 20 ft, 3-Wire Neoprene Cord and Plug |
| Dimensions | : | 12-7/8 Inch W x 19-5/16 Inch H |
| Finish | : | Powder Coated Epoxy |
| Flow Rate | : | 118 gpm |
| Material | : | Cast Iron |
| Maximum Head | : | 50 ft |
| Outlet Size | : | 2 Inch NPT |
| Power Rating | : | 1 hp |
| Series | : | Waste-Mate®, 290 |
| Speed | : | 3450 Rpm |
| Temperature Rating | : | 130 deg F |
| Type | : | High Head, Manual, Permanent Split Capacitor |
| Voltage Rating | : | 230 V, 60 Hz, 1 Phase |
| Warranty | : | Limited |
- No sheet metal parts to rust or corrode
- Stainless steel screws, bolts, float rod, handle, guard and arm and seal assembly
- Oil-filled, hermetically-sealed, automatic reset thermal overload protected (1 Ph only) motor
- Shaft seal - stainless steel carbon and ceramic rotary
- Corrosion-resistant
- Upper and lower ball bearing running in a bath of oil
- Neoprene square ring and gasket
- Automatic units available with float-operated, submersible, 2-pole mechanical switch
- Gives motor extra protection from seal leaks
- Improved bearing lubrication
- Helps eliminate seal and bearing damage from dry runs
- Class B insulation
- Oil-filled cooling
- Non-Clogging vortex impeller
- Auto-reset thermal overload motor protection
Standard/Approvals: CSA, SSPMA Certified, UL Listed
Application: Sewage Waste Transfer
Brochure
