Zoeller Waste-Mate® 264 Sewage Pump, Automatic, 90 gpm, 2 Inch NPT Outlet, 18 ft Maximum Head, Bronze Non-Clogging Vortex Impeller, 1725 Rpm, 4/10 hp, 115/230 V, 1 Phase, 4.7 - 9.4 A, 60 Hz, 15 ft, 130 deg F, NEMA 6, Cast Iron, Powder Coated Epoxy, 14-3/4 Inch L
| Amperage Rating | : | 4.7 - 9.4 A |
| Cord Size | : | 15 ft |
| Dimensions | : | 14-3/4 Inch L |
| Enclosure Type | : | NEMA 6 |
| Finish | : | Powder Coated Epoxy |
| Flow Rate | : | 90 gpm |
| Frequency Rating | : | 60 Hz |
| Impeller Type | : | Bronze Non-Clogging Vortex |
| Material | : | Cast Iron |
| Maximum Head | : | 18 ft |
| Outlet Size | : | 2 Inch NPT |
| Power Rating | : | 4/10 hp |
| Series | : | Waste-Mate®, 264 |
| Speed | : | 1725 Rpm |
| Temperature Rating | : | 130 deg F |
| Type | : | Automatic |
| Voltage Rating | : | 115/230 V, 1 Phase |
| Warranty | : | 3 Years |
This series of submersible pumps is designed for use in residential or light commercial dewatering and wastewater applications and can be used to transfer effluent or raw sewage. The innovative vortex impeller design reduces the risk of clogging and allows each pump to pass 2 Inch spherical solids. These durable cast iron pumps include a powder coated epoxy finish to prevent corrosion and are designed to provide great heat dissipation from the motor, ensuring a long service life. As with every Zoeller pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance! this attention to detail is an inherent feature of every pump in this series, making it one-of the most reliable in the industry.
- Float-operated, submersible (NEMA 6), 2-pole switch
- Durable, cast iron construction - switch cap, motor and pump housing
- Engineered plastic base
- Stainless steel screws, bolts, handle, guard, arm and seal assembly
- Corrosion-resistant, powder coated epoxy finish
- Hermetically-sealed, automatic reset thermal overload protection
- Upper and lower sleeve bearings running in bath of oil
- Carbon and ceramic shaft seal
- Passes 2 Inch (50 mm) spherical solids
- 2-1/2 Inch (31.8 cm) On point
- 4-1/2 Inch (11.4 cm) off point
- Simplex and duplex systems available
- Automatic and non-automatic models available
- Non-automatic for variable level systems
- Models available packaged with piggyback variable level float switch
- Electrical alternators for duplex systems available with variable level float switches
- High water alarms available
- Mechanical alternators available for duplex systems
- Unit ships free via UPS
Standard/Approvals: UL Listed, CSA Certified
Application: Lift Station, Septic and Sump
Brochure
