Zoeller Waste-Mate® 267 Sewage Pump, Automatic, 128 gpm, 2 Inch NPT Outlet, 21-1/2 ft Maximum Head, Bronze Non-Clogging Vortex Impeller, 1725 Rpm, 1/2 hp, 115 - 460 V, 1 Phase, 1.5 - 10.4 A, 60 Hz, 15 ft, 130 deg F, NEMA 6, Cast Iron, Powder Coated Epoxy, 14-9/32 Inch L
| Amperage Rating | : | 1.5 - 10.4 A |
| Cord Size | : | 15 ft |
| Dimensions | : | 14-9/32 Inch L |
| Enclosure Type | : | NEMA 6 |
| Finish | : | Powder Coated Epoxy |
| Flow Rate | : | 128 gpm |
| Frequency Rating | : | 60 Hz |
| Impeller Type | : | Bronze Non-Clogging Vortex |
| Material | : | Cast Iron |
| Maximum Head | : | 21-1/2 ft |
| Outlet Size | : | 2 Inch NPT |
| Power Rating | : | 1/2 hp |
| Series | : | Waste-Mate®, 267 |
| Speed | : | 1725 Rpm |
| Temperature Rating | : | 130 deg F |
| Type | : | Automatic |
| Voltage Rating | : | 115 - 460 V, 1 Phase |
| Warranty | : | 3 Years |
Effluent or dewatering submersible pump for sewage, effluent, and dewatering. This waste-mate submersible pump is designed to be used in a variety of septic, sump, and lift station applications and offers a wide range of versatility capable of pumping 2 Inch solids up to 21.5 ft total dynamic head.
- Float-operated, submersible (NEMA 6), 2-pole switch
- Durable, cast iron construction - switch cap, motor and pump housing
- Cast iron base on models 267 and 268
- Engineered plastic base on model 266
- Non-Clogging vortex impeller design. Engineered plastic impeller with metal inserts (1 Ph). Model 267 available with cast iron impeller (standard on 3 Ph models)
- Not affected by materials normally found in drainage and sewage pumps
- Stainless steel screws, bolts, handle, guard and arm and seal assembly
- Neoprene square ring and gasket
- Oil-filled, hermetically-sealed motor
- Oil-lubricated bearings
- Carbon and ceramic shaft seal
- Passes 2 Inch (50 mm) spherical solids12 Inch (30 cm) On point, 4 Inch (10 cm) off point (automatic units)
- Corrosion-resistant, powder coated epoxy finish
- Completely submersible
- Watertight and dust tight
- Automatic and non-automatic models available
- Models available packaged with a piggyback variable level float switch
- Automatic reset thermal overload protection (1-phase only)
- Unit ships free via UPS
Standard/Approvals: UL Listed, CSA Certified
Application: Lift Station, Septic and Sump
Brochure
