NIBCO® Series PC Ball Valve, 2-Piece, 1/2 Inch, Press, 250 psi, Full Port, Silicon Bronze Body, Silicon Bronze Ball, Silicon Bronze Stem, Brass Pack Gland, Plated Steel Handle Nut, PTFE Thrust Washer, PTFE Stem Packing, EPDM O-Ring, Lever Actuator, 250 deg F, 3.93 Inch L
| Actuator Type | : | Lever |
| Ball Material | : | Silicon Bronze |
| Body Material | : | Silicon Bronze |
| Dimensions | : | 3.93 Inch L |
| End Style | : | Press |
| Nominal Size | : | 1/2 Inch |
| Port Type | : | Full |
| Pressure Rating | : | 250 psi |
| Series | : | Series PC |
| Softgoods Material | : | PTFE Stem Packing, EPDM O-Ring |
| Temperature Rating | : | 250 deg F |
| Trim Material | : | Silicon Bronze Stem, Brass Pack Gland, Plated Steel Handle Nut, PTFE Thrust Washer |
| Type | : | 2-Piece |
| Warranty | : | 5 Years Limited |
The NIBCO® press System® brass ball valve features press-to-connect end connections with an inboard bead and EPDM O-rings for quick and easy joinery to the piping system. Simply applying pressure from a press fit tool tightens the o-ring onto the tube, ensuring a clean, permanent, watertight seal in seconds, with no flame, solder or flux. With the full port design and chrome plated brass ball, the ball valve allows maximum flow and minimum pressure drop or turbulence with unobstructed bi-directional flow. The lever handle provides convenient quarter-turn operation and bubble-tight shut off the NIBCO® press System® is user friendly, quick and easy-to install. When properly crimped a unique “N” witness mark is clearly visible.
- Blowout proof stem
Standard/Approvals: CSA Certified, FM Approved, MSS SP-110, NSF/ANSI 61/8, UL Listed
Application: Commercial and Industrial
Specification Sheet
