Bradford White® ElectriFLEX™ Electric Water Heater, Commercial Medium Duty, 240 V, 3 Phase, 18 kW, 3/4 Inch NPT, 50 gal Tank, 74 gph at 100 deg F Recovery, Magnesium Anode Rod Heating Element, Surface Mount, 1-1/4 Inch NPT Water Connection, 1600 deg F, Steel, Vitraglas®, 22 Inch Dia x 46-1/2 Inch H, Includes Temperature and Pressure Relief Valve
| Dimensions | : | 22 Inch Dia x 46-1/2 Inch H |
| Electrical Connection | : | 3/4 Inch NPT |
| Electrical Ratings | : | 240 V, 3 Phase, 18 kW |
| Finish | : | Vitraglas® |
| Heating Element | : | Magnesium Anode Rod |
| Includes | : | Temperature and Pressure Relief Valve |
| Material | : | Steel |
| Mounting Type | : | Surface |
| Recovery Rate | : | 74 gph at 100 deg F |
| Series | : | ElectriFLEX™ |
| Tank Capacity | : | 50 gal |
| Temperature Rating | : | 1600 deg F |
| Type | : | Commercial, Medium Duty |
| Warranty | : | 3 or 5 Years on Tank, 1 Year on Component Parts |
| Water Connection | : | 1-1/4 Inch NPT |
- Fully automatic controls - fast acting surface-mount thermostat for automatic temperature control. Factory installed sensitive manual reset energy cut-off for safety to prevent overheating. (maximum thermostat setting is 185 deg F)
- Direct heat transfer with three immersed incoloy elements - transfers heat directly and efficiently to the water. Screw-in style element
- Factory Installed Hydrojet® sediment reduction system - cold water inlet sediment reducing device helps prevent sediment build up in the tank
- Vitraglas® lining - Bradford White tanks are lined with an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water
- 2 Inch Non-CFC foam insulation - covers the side and top of tank, reducing the amount of heat loss. This results in less energy consumption, improved operation efficiencies and jacket rigidity
- Water connections - 1-1/4 Inch NPT factory installed true dielectric fittings extend water heater life and eases installation
- Conversion kits - design certified by ETL for field conversion. conversion kits are available to convert any one model to a variety of voltages, kW inputs and phase (kit part numbers on reverse side.)
- Protective magnesium anode rod - Provides added protection against corrosion for long trouble-free service
- Steel Tank - Heavy gauge steel automatically formed, rolled and welded
- Protective magnesium anode rod - Provides added protection against corrosion for long trouble-free service
- Heavy gauge steel automatically formed, rolled and welded
- Low restriction brass drain valve - durable tamper proof design
Standard/Approvals: CSA Certified, ETL Listed, cETLus Listed, ASHRAE 90.1b Certified, C.E.C. Listed
Instruction Sheet
