Bradford White® Hydrojet® ElectriFLEX™ Electric Water Heater, Commercial Light Duty Upright, 240 V, 3 Phase, 4500 W, 3/4 Inch NPT, 50 gal Tank, 18 gph at 100 deg F Recovery, Magnesium Anode Rod Heating Element, Surface Mount, 3/4 Inch NPT Water Connection, 1600 deg F, Steel, Vitraglas®, 22 Inch Dia x 46-1/2 Inch H, Includes Temperature and Pressure Relief Valve
Dimensions |
: |
22 Inch Dia x 46-1/2 Inch H |
Electrical Connection |
: |
3/4 Inch NPT |
Electrical Ratings |
: |
240 V, 3 Phase, 4500 W |
Finish |
: |
Vitraglas® |
Heating Element |
: |
Magnesium Anode Rod |
Includes |
: |
Temperature and Pressure Relief Valve |
Material |
: |
Steel |
Mounting Type |
: |
Surface |
Recovery Rate |
: |
18 gph at 100 deg F |
Series |
: |
Hydrojet®, ElectriFLEX™ |
Tank Capacity |
: |
50 gal |
Temperature Rating |
: |
1600 deg F |
Type |
: |
Commercial, Light Duty, Upright |
Warranty |
: |
3 or 5 Years on Tank, 1 Year on Component Parts |
Water Connection |
: |
3/4 Inch NPT |
- Fully automatic controls - fast acting surface-mount thermostat for automatic temperature control. Factory installed sensitive manual reset energy cut-off for safety to prevent overheating. (maximum thermostat setting is 185 deg F)
- Direct heat transfer with immersed elements-transfers heat directly and efficiently to the water. Screw-in style
- Factory-Installed Hydrojet® total performance system - cold water inlet sediment reducing device helps prevent sediment build-up in tank. Increases first hour delivery of hot water while minimizing temperature build-up in tank
- Vitraglas® lining - Bradford White tanks are lined with an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water. This formula (Vitraglas®) is fused to the steel surface by firing at a temperature of over 1600 deg F (871 deg C)
- 2 Inch Non-CFC Foam Insulation - Covers the side and top of tank, reducing the amount of heat loss. This results in less energy consumption, improved operation efficiencies and jacket rigidity
- Water connections-3/4 Inch NPT factory-installed true dielectric fittings extend water heater life and ease installation (LE2120T has 1 Inch NPT dielectric waterway fittings)
- Factory-installed Heat Traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation
- Protective magnesium anode rod - Provides added protection against corrosion for long trouble-free service
- Steel Tank - Heavy gauge steel automatically formed, rolled and welded
- Field conversion kits - change voltage and kW in the field
- Field convertible - Units are shipped from factory standard three phase, non-simultaneous and can be converted to Single Phase and/or Simultaneous operation in the field
Standard/Approvals: CSA Certified, ETL Listed, ASHRAE 90.1b Certified, C.E.C. Listed
-
Operation Manual
https://4500cpe.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/Bradford_White_LE250S3_3_Operation_Manual.pdf
-
Parts List
https://4500cpe.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/Bradford_White_LE250S3_3_Parts_List.pdf
-
Service Manual
https://4500cpe.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/Bradford_White_LE250S3_3_Service_Manual.pdf
-
Specification Sheet
https://4500cpe.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/Bradford_White_LE250S3_3_Specification_Sheet.pdf
-
Warranty Sheet
https://4500cpe.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/Bradford_White_LE250S3_3_Warranty_Sheet.pdf