Bradford White® EF-60T-125E-3N

Bradford White® eF Series ICON HD™ Hydrojet® Gas Water Heater, Commercial Ultra High Efficiency, 125000 BtuH Heating, Natural Gas, 3/4 Inch NPT Gas Connection, 60 gal Tank, Direct Spark Ignition, 2, 3 or 4 Inch Draft Hood, 104 gph at 140 deg F Recovery, 96.0 % Energy Efficient, Magnesium Anode Rod Heating Element, 1 Inch NPT Water Connection, 1600 deg F, Steel, Vitraglas®, 28-1/4 Inch Dia x 57 Inch H, Includes Temperature and Pressure Relief Valve

• Thermal Efficiency up to 99.1% - Ultra High Efficiency results in less fuel consumption and greater hot water recovery
• ICON HD™ - Intelligent proven design combines temperature control, diagnostic codes, and system ignition functions into a single control board with a digital LCD display
• Factory Installed Hydrojet® sediment reduction system - cold water inlet sediment reducing device helps prevent sediment build up in the tank
• Direct Spark Ignition - For improved operational dependability and durability
• Operation Mode - Two different digitally displayed operation modes have the capability of adjusting the temperature setting up to 180 deg F (82 deg C), and adjusting the degree setting (deg F to deg C, or deg C to deg F)
• Premix Power Burner - A self compensating negative regulation system automatically increases or decreases fuel flow when a change in combustion air is detected. This provides the range for optimum combustion and efficiency (automatic high altitude compatibility)
• Three Pass Heat Exchanger System - The three pass Heat Exchanger system keeps the hot combustion gases moving at a high velocity. The combination of high turbulence and velocity causes an enormous rate of heat transfer into the water
• Submerged Combustion Chamber - Submerging the combustion chamber in the center of the water storage tank minimizes radiant heat loss and improves efficiency
• Zero Inch Clearance - The eFSeries® jacket is cool to the touch and is approved for zero inch clearance to combustibles for unsurpassed installation flexibility
• Magnesium Anode Rods - Each eFSeries® model has multiple anodes to provide added protection against corrosion for long trouble-free service (EF100T399 has two powered anode rods)
• Factory Installed Hydrojet® sediment reduction system - cold water inlet sediment reducing device helps prevent sediment build up in the tank
• Water Connections - Factory installed true dielectric waterway fittings extend water heater life and eases installation. Multiple water connection locations allow for greater installation flexibility
• Hand hole cleanout - allows inspection of tank interior and facilitates the removal of sediment deposits

Standard/Approvals: AHRI Certified, ANSI Z-21.10.3, CSA Certified

Application: Apartments, Cafeterias and Restaurants

• Operation Manual https://4500cpe.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/Bradford_White_EF_60T_125E_3N_Operation_Manual.pdf
• Parts List https://4500cpe.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/Bradford_White_EF_60T_125E_3N_Parts_List.pdf
• Service Manual https://4500cpe.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/Bradford_White_EF_60T_125E_3N_Service_Manual.pdf
• Specification Sheet https://4500cpe.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/Bradford_White_EF_60T_125E_3N_Specification_Sheet.pdf
• Warranty Sheet https://4500cpe.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/Bradford_White_EF_60T_125E_3N_Warranty_Sheet.pdf