Bradford White® Defender Safety System® ICON System™ Hydrojet® Gas Water Heater, Commercial Light Duty Power Vent, 76000 BtuH Heating, Natural Gas, 1/2 Inch NPT Gas Connection, 75 gal Tank, Spark to Pilot Ignition, 3 or 4 Inch Draft Hood, 74 gph at 100 deg F Recovery, Magnesium Anode Rod Heating Element, Wall Mount, 3/4 Inch NPT Water Connection, 1600 deg F, Steel Surface, Vitraglas®, 26 Inch Dia x 69-7/16 Inch H, Includes Temperature and Pressure Relief Valve
| Dimensions | : | 26 Inch Dia x 69-7/16 Inch H |
| Draft Hood Size | : | 3 or 4 Inch |
| Finish | : | Vitraglas® |
| Gas Connection | : | 1/2 Inch NPT |
| Gas Type | : | Natural Gas |
| Heating Capacity | : | 76000 BtuH |
| Heating Element | : | Magnesium Anode Rod |
| Ignition Type | : | Spark to Pilot |
| Includes | : | Temperature and Pressure Relief Valve |
| Material | : | Steel Surface |
| Mounting Type | : | Wall |
| Recovery Rate | : | 74 gph at 100 deg F |
| Series | : | Defender Safety System®, ICON System™, Hydrojet® |
| Tank Capacity | : | 75 gal |
| Temperature Rating | : | 1600 deg F |
| Type | : | Commercial, Light Duty, Power Vent |
| Warranty | : | 3 or 5 Years on Tank, 1 Year on Component Parts |
| Water Connection | : | 3/4 Inch NPT |
- Bradford White ICON System™ - Intelligent gas control with spark to pilot ignition system eliminates the constant burning pilot. This results in savings of pilot gas during standby periods (120 VAC)
- Enhanced Performance - Proprietary algorithms provide enhanced First Hour Delivery ratings and tighter temperature differentials
- Advanced Temperature Control System - Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels (up to 180 deg F)
- Intelligent Diagnostics - An exclusive green LED light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting
- Power Vented Water Heater - Designed for installations where atmospheric units cannot be used. Exhaust gases are vented under positive pressure directly out of the building through the roof or the wall
- Powerful Blower Motor - Our significantly quiet design has greater resistance to outside winds and the power to vent in many difficult venting situations
- Horizontal and Vertical Venting - PVC, ABS or CPVC (Maximum equivalent vent length on reverse side)
- Advanced ScreenLok® Technology flame arrestor design - flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater (excluding LG1PV55H783N & LG2PV75H763N)
- Flammable Vapor Sensor - Electronic sensor prevents burner operation if flammable vapors are detected. The sensor will also prevent operation if there is ongoing flammable vapor burn inside the combustion chamber (excluding LG1PV55H783N & LG2PV75H763N)
- Maintenance-Free - No regular cleaning of air inlet openings or flame arrestor is required under normal conditions (excluding LG1PV55H783N & LG2PV75H763N)
- Sight Window - Offers a view into the combustion chamber to observe the operation of the pilot and burner
- Factory-Installed Hydrojet® total performance system - cold water inlet sediment reducing device helps prevent sediment build-up in tank. Increases first hour delivery of hot water while minimizing temperature build-up in tank
- Vitraglas® Lining - Bradford White tanks are lined with an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water. This formula (Vitraglas®) is fused to the steel surface by firing at a temperature of over 1600 deg F (871 deg C)
- Non-CFC foam insulation - covers the sides and top of tank, reducing the amount of heat loss. This results in less energy consumption, improved operation efficiencies and jacket rigidity
- Water Connections - 3/4 Inch NPT factory installed true dielectric fittings extend water heater life and make installation easier
- Factory-installed Heat Traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation
- Low Restriction Brass Drain Valve - Durable tamper-proof design
Standard/Approvals: AHRI Certified, ANSI Z-21.10.3, CSA Certified
Application: Apartments, Cafeterias and Restaurants
Instruction Sheet
